Subject to planning consent, we are required to provide a new 132kV connection between the existing Fasnakyle 275kV substation to the proposed Bingally 400kV substation, to allow connection onto the wider transmission network. To facilitate this new 132kV connection, we are proposing to utilise existing towers , along with new equipment at a transition location, (in the form of a cable sealing end compound), and a new underground cable between the cable sealing end compound and the proposed Bingally 400kV substation. The proposed routes are up to 10 km in length. For more information about our project please visit our project website by clicking here.
Portal Navigation
The information below is intended to assist with navigating the 3D Portal, however there is an Interactive Portal User Guide, which you can access by clicking here
The Map
In order to view the visualisations and navigate the portal, please start by clicking on any of the cameras on the adjacent map. They are situated next to their relevant viewpoints to allow access to areas of interest.
Should you prefer to view the map in satellite, this can be done by clicking the ‘Satellite’ tab at the top right hand corner of the map.
Once you have clicked on a viewpoint, if you want to return to the full map at any point, please click on the project map icon situated down the left-hand side of the map – it is a location pin icon on top of a grid.
If you are viewing a video and would like to return to the overview map, the project map icon is situated at the top right-hand corner of the screen.
Visualisations
Once you click on a visualisation, you will be presented with three tabs across the top middle of the screen; ‘Existing’ and ‘Proposed’
If you click on the existing tab, it will show you the area as it currently stands, without the Fasnakyle to Bingally 132kV Connection.
If you click on the proposed tab, it will show you the area with the Fasnakyle to Bingally 132kV Connection.
